靶面激光光斑尺寸原位测量的研究

提供了一种简便易行的靶面激光光斑尺寸原位测量的方法。从高斯光束的横向光强分布特性出发,建立了激光烧蚀斑半径与辐照激光能量、光斑尺寸、烧蚀阈值间的关系式,模拟分析发现辐照激光光斑尺寸对烧蚀斑半径随辐照能量变化曲线有较大影响。对于脉宽为2 ms,波长为1064 nm的激光,实验测量了不同能量激光辐照下相纸烧蚀斑半径,并用推导出的关系式拟合测量数据,获得了靶面处光斑尺寸和样品烧蚀阈值。同时,也测量了不同位置处的光斑尺寸和样品烧蚀阈值,对高斯光束束腰位置和样品烧蚀阈值的光斑尺寸效应进行了验证。研究结果表明该技术结果可靠,简单高效。该技术可以为高能激光与固体物质相互作用的基础研究和激光加工等应用领域中实现简单方便地测量靶面光斑尺寸提供帮助。     

基于压缩感知的移动群智感知任务分发机制

针对移动群智感知任务中区域全覆盖感知成本过高问题，提出基于压缩感知的移动群智感知任务分发（CS-TD）机制。首先提出了感知任务整体成本模型，该模型综合考虑了参与感知任务的节点个数、节点的感知次数与数据上传次数；然后基于成本模型，分析感知节点的日常移动轨迹，结合压缩感知数据采集技术，提出了一种基于感知节点轨迹的压缩感知采样方法；其次通过区域全覆盖最少节点（RCLN）算法，选出最佳节点集合，对节点进行任务分配，利用压缩感知技术恢复节点数据；最后在多次感知任务的迭代中对感知节点的可信程度进行评定，保证任务方案的最优性。对CS-TD分发模型进行多次实验验证，与已有的CrowdTasker算法相比，CS-TD算法平均成本降低了30%以上。CS-TD模型能有效降低感知节点的消耗，能在全覆盖感知任务中降低整体感知成本。     

Feasibility study to control fiber distribution for enhancement of composite properties via three-dimensional printing

The distribution of fibers in the composite (which takes into account both their locations and orientations) is one of the important factors that affect the mechanical properties of FRCs. However, this parameter depends on various factors during composite fabrication, and controlling the distribution of fibers in the produced material represents a significant challenge. In this study, the applicability of three-dimensional (3D) printing technique for controlling fiber distributions was evaluated. The fibers fabricated using a 3D printer were placed inside a mold to produce cementitious composites. Three-point bending tests were conducted and the results of the experiment were discussed.     

吹氩流量对结晶器流场影响的插钉工业试验

 结晶器吹氩流量对流场分布有明显影响，因此明确吹氩流量对结晶器内流场分布的影响规律对提高铸坯质量有重要意义。通过插钉法工业试验研究了吹氩流量对结晶器内流场分布的影响，并且定量分析了液位波动的变化。结果表明，随着吹氩流量的增大，流场形态从双环流逐步转变为复杂流和单环流。结晶器内流场形态从双环流转变为复杂流和单环流的过程中，水口附近速度逐渐增大，液位逐渐升高，弯月面速度分布逐渐转变为从水口流向窄面，液位波动也相应增大。因此，生产过程中应选择合适的吹氩流量，避免产生复杂流和单环流，以提高铸坯质量。     

高斯混合模型结合加权似然的目标跟踪算法

鉴于高斯混合模型对背景变化快时无法精确检测出目标和目标跟踪的适应性差等瑕疵，提出了基于加权似然跟踪器来改进高斯混合模型实现运动目标跟踪算法。主要引入了自适应高斯混合模型来实时检测运动目标，然后空间加权似然来进行视频中的目标定位，引入加权似然期望值来改进高斯混合模型处理视频中的多尺度、多角度变化的目标跟踪不精准问题。通过VOT 2014 dataset对比实验结果表明提出的基于加权似然跟踪（Weighted Likelihood Tracking，WLT）和改进高斯混合模型（Improved Gaussian Mixture Model，IGMM）的目标跟踪算法较传统高斯混合模型跟踪算法在跟踪的精度有较大提高。在应对多尺度、多角度变化的目标跟踪表现出了较大的优势。     

Microtopography‐Guided Radial Gradient Circle Array Film with Nanoscale Resolution

Distribution of multimaterials at arbitrary positions with nanoscale resolution and over a large area substrate is essential to future advances in functional graded materials. Such stringent requirements are highly beyond the reach of current techniques, although newly developed 3D printing technologies are addressed. Here, a radial gradient circle array film with the distribution accuracy up to ≈18 nm is fabricated by using microtopographic substrate. A mathematical model is developed to guide the distribution of position, size, shape, and type of materials on an arbitrary section for the given morphology of substrate. The periodic electrical and mechanical properties of the radial gradient circle film are identified, which can be beneficial for further functionalization and applications, such as gradient refractive index lenses, microcoils, and microantennas.     

First principles computational studies of spontaneous reduction reaction of Eu(III) in eutectic LiCl‐KCl molten salt

Using first principles calculations, we study fundamental mechanism of spontaneous reduction reaction of Eu³⁺ to Eu²⁺ in eutectic LiCl‐KCl molten salt. We decouple the reaction Gibbs free energy into enthalpy and entropy contributions by using rigorous thermodynamic formalism. Key structural features of the solvation shell are characterized by the radial distribution function and the coordination number. Compared with Eu²⁺, the Eu³⁺ ion has a more rigid framework of the solvation shells, corroborating its stronger electrostatic interaction with neighboring ligands of Cl^? ions and a more favorable state on the aspect of enthalpy. Computations on vibrational frequency, however, pose significant contribution of vibrational entropy to the reaction Gibbs free energy for the reduction. Vibration frequency of Eu²⁺ is smaller than that of Eu³⁺, driving a more positive change of the entropy in the reduction reaction. Furthermore, an Eu²⁺ diffuses more quickly than an Eu³⁺ in the LiCl‐KCl molten salt with switching mechanism of ligand Cl^? ions in the solvation shell. Our results propose that the spontaneity of the reduction reaction is driven by the entropic contribution by overcoming the penalty of the reaction enthalpy.     

ACME台架蒸汽发生器传热特性数值模拟

以ACME台架的蒸汽发生器（SG）为研究对象，SG二次侧选用两流体模型，采用计算流体力学软件CFX对ACME台架的SG进行了整体直接模拟。针对稳定试验工况进行了计算，得到了SG一、二次侧的温度分布，二次侧空泡份额分布及传热管的壁温等参数沿U型管高度方向的变化，获得了二次侧较详细的流动和传热特性。计算结果表明，从第2道折流板开始，折流板底部已积聚了部分气泡，随高度的增加，折流板底部积聚的气泡越多，在弯管区附近及以上区域，已全部变为蒸汽。本文计算结果与试验结果符合较好。     

Numerical study of flow distribution uniformity for the optimization of gradient porosity configuration of porous copper fiber sintered felt for hydrogen production through methanol steam reforming micro-reactor

A macroscopic numerical method is proposed to study the flow distribution uniformity of a novel porous copper fiber sintered felt (PCFSF), which has gradient porosities and was developed as the methanol steam reforming micro-reactor catalyst support for hydrogen production for fuel cell applications. The macroscopic porous media developed by the ANSYS/FLUENT software is used to represent the PCFSF. Our results indicate that the gradient porosity can reshape the flow distribution of PCFSFs greatly, thus producing significant influence on their performance. It is further revealed that, for a PCFSF with a determined gradient porosity configuration but different reactant feed directions, the velocity uniformity can be used as a quantitative criterion to evaluate the performance of hydrogen production. Furthermore, new gradient PCFSFs are produced according to the flow distribution of original gradient PCFSFs. The preliminary experimental results of the new gradient PCFSFs of 0.8-0.9-0.7 and 0.7-0.9-0.8 exhibit better methanol conversion and H₂ flow rate. This indicates that the numerical method can be used for the optimization of PCFSFs' gradient porosity configuration, which consists of the shape and position of the interfaces between different porosity portions, the number of interfaces and the porosity distribution in different portions.     

水下循迹航行器水动力学性能数值研究

为了研究低速水下循迹监测航行器的水动力学性能数值计算问题,采用FLUENT软件和SST剪切应力输运模型,通过雷诺时均N-S方程分析流速一定的情况下,取不同攻角、不同水平舵角作为来流条件,研究未安装推进器以及安装推进器且其安装位置不同时,航行器的升力系数、俯仰力矩系数、表面压力分布和流场速度的变化规律。结果表明:在未安装推进器以及推进器的安装位置不同时,随着攻角的变化,升力系数呈线性变化,俯仰力矩系数呈非线性变化;随着水平舵角的变化,升力系数和俯仰力矩系数呈线性变化。当推进器安装在航行器头部时,对航行器流场压力和流场速度变化影响最大;当安装在航行器尾部时,对二者影响最小。对于低速航行器,应尽量将推进器安装在中间靠后位置,以提高航行器的水动力性能。升力系数的试验结果与数值仿真结果之间最大相差7. 51%,阻力系数的试验结果与数值仿真结果最大相差5. 84%,均吻合较好。研究结果可以为低速水下循迹航行器的优化设计和发展提供理论参考。